Measuring for an Inside Mount
Inside-mount shutters sit inside the recess, so final dimensions need to describe the smallest usable opening accurately.
Check your recess depth before measuring
As a clear guide, allow approximately 70mm of clear recess depth for an inside-mounted plantation shutter. Confirm the shallowest usable depth and measure to the first obstruction that could interfere with the shutter, including a handle, winder, lock, key, flyscreen or other window fitting.
Where the opening has around 70mm or more of clear space, you can typically proceed with the inside-mount measuring instructions.
Have less than 70mm, or an obstruction in the recess? An inside mount may still be possible based on the frame choice and where the obstruction sits. See our Managing Window Obstructions guide for the detailed clearance requirements.
Measuring for an Inside Mount
After you have confirmed that an inside mount is suitable, record the final shutter width and drop dimensions. Windows are rarely perfectly square, so measure in multiple positions instead of relying on one width and one height.
You will require a metal tape measure, something to record each dimension and a pen or pencil. Do not make your own manufacturing deductions.
Measuring Inside Mount for a Square-Set Window
- Measure the drop in three places: left, centre and right.
- Measure the width in three places: top, middle and bottom.
- Use the smallest width and smallest drop.
Measuring Inside Mount for a Window with an Architrave
The architrave doesn’t become the measuring point for an inside mount. Measure the opening inside the recess.
- Measure the drop in three places.
- Measure the width in three places.
- Use the smallest width and smallest drop.
Prior to releasing the order: if your recess is less than approximately 70mm deep, or incorporates handles, winders, locks, flyscreens or other obstructions, check our Managing Window Obstructions guide before finalising your inside-mount dimensions.
Did this answer the job question?
Related articles
Need trade support?
Send our trade team the window opening dimensions and photos if anything is unclear about the right shutter setup.
