Inside vs Outside Mount Plantation Shutters
The shutter panels themselves may be similar, but deciding whether the frame sits inside or outside the window opening changes the finished look, projection, dimensions and the frame profile you will use.
Covered on this page
What is the difference between an inside and outside mounted shutter?
An inside mount sits inside the recess. An outside mount sits on the front face of the architrave or wall. In many windows, the available depth and position of window hardware make one option clearly more workable than the other.
Inside mounting typically gives a more recessed look and results in a slightly smaller overall shutter. Outside mounting moves the shutter forward, which is useful when the recess is shallow or obstructed.
Inside mount vs outside mount shutter
Before selecting, measure the recess depth and identify the closest obstruction. Handles, winders, locks, flyscreens and inward-opening windows can reduce the usable depth even if the recess itself looks deep.
What is an inside mounted plantation shutter (recess fit)?
An inside mount positions the frame inside the recess and can use either a Z-frame or inside L-frame. It can sit close to flush with the wall and typically gives the cleanest recessed finished look where adequate clearance is available.
What is an outside mount plantation shutter (face fit)?
An outside mount uses an outside L-frame fixed to a flat section of architrave or to the wall around the window. It is ideal when there isn’t enough clear recess depth for an inside frame or where an inside fit would obstruct normal window operation.
Did this answer the job question?
Related articles
Need trade support?
Send our trade team the window opening dimensions and photos if anything is unclear about the right shutter setup.
